The Company Line
There are bass players who never use a pedal (other than possibly a tuner), there are bass players who use a small number of carefully chosen pedals, and there are bass players sporting pedal boards to rival the most flamboyant guitar players. If you fall into one of the latter two categories (and possibly even if you don’t), you will be familiar with the Empress Effects brand. Empress Effects, Inc. was founded by (electrical engineer) Steve Bragg back in 2005, and his original effect was a tremolo pedal. This was followed by the Superdelay, and not long after, Empress Effects added an assembler (Mike Stack) and a designer (Jay Fee). The Bass Compressor has been a highly regarded success, and a staple on many bass pedal boards. Empress Effects has really grown, and now consists of a team of nineteen people!
Designed by Jay, the original ParaEQ was introduced in 2008, and immediately grabbed the attention of almost every pedal-using bass player. At 4.5” wide, by 3.5” long, by 1.5” high (2.0” with controls), the “medium-sized” ParaEQ packed a powerful, versatile EQ into a fairly compact package. Fast forward to 2022, though, and the ParaEQ MKII packs the same functionality into an even smaller package, only 2.6” wide, by 4.8” long, by 1.5” high (2.5” with controls). Very impressive! What is even more crazy is that the ParaEQ MKII Deluxe, which is the same size as the non-Deluxe version, also adds both variable high and low-pass filters, as well as both low-shelf and high-shelf filters. Sound too good to be true? Let’s find out!
Stacked and Packed
Looking at the original ParaEQ, you might be doubtful as to how well it could be crammed into an enclosure little more than half as wide, while still allowing for useable (and legible!) controls, but by golly, they pulled it off! The ParaEQ MKII is a 3-band parametric EQ, which slices the frequency range up into three overlapping bands: low (35Hz to 500Hz), mid (250Hz to 5kHz), and high (1kHz to 20kHz), with +/- 15dB available for each band. In addition, you can adjust the Q (the “width” of the boost or cut) for each band with a 3-way mini-toggle, which allows you to select wide (Q = 1, and affects about 1.5 octaves), medium (Q = 2.5, and affects about 2/3 octave), or narrow (Q = 4, and affects about 1/3 octave). Rounding out the controls on the ParaEQ, we have a mini-pot for the level of the boost control (from 0 to +30dB), and foot switches for effect bypass and boost. Both switches have corresponding LEDs to let you know if the function is engaged. The ¼” input and output jacks, as well as the 9V DC (300mA minimum) power jack are conveniently located on the top panel of the enclosure.
The ParaEQ MKII Deluxe is laid out in similar fashion, although the 3-way toggles for the width of the Q for each band are replaced by variable mini-pots, allowing you to more specifically dial in the width of the boost or cut being supplied. In addition, below the three gain knobs, we have four mini-pots for the variable high-pass filter (from 10Hz to 330Hz), the +/- 15dB control of the low-shelf filter (set at 200Hz and below), the +/- 15dB control of the high-shelf filter (set at 1kHz and above), and the variable low-pass filter (from 1.5kHz to 22kHz). Both of the shelving controls are Baxandall filters, and both the high-pass and low-pass filters feature 12dB/octave slopes. The Deluxe really does pack in a lot more control, and only ups the price by $75, so I can see a lot of players pursuing this option.
The Devil’s in the Details
As impressive as these pedals seem at first glance, the deeper you dive into the details, the more you appreciate them. The signal-to-noise ratio of greater than 107dB and the total harmonic distortion (THD) of less than 0.005% are both extremely impressive, and both pedals offer exceptionally high headroom, due in part to the hefty 27V internal power supply (which is a notable increase from the original ParaEQ).
Empress has also built in an “advanced configuration” option, which you can access by holding down both switches as the power is plugged in. The two options which you can control in the advanced configuration are whether the bypass mode is true bypass (the default setting) or a buffered bypass, and whether the boost control can be used independently of the EQ. I really like the added functionality of allowing the boost to function independently, and this allows me to leave my dedicated boost pedal (which is useful for balancing out instruments with varying outputs) off the board.
The enclosures are sturdy enough to inspire confidence, and the finish and printing are expertly done. In dim light and/or viewed from an angle, some of the smaller-font numbers can be hard to read, but in good lighting they are very legible. Once you’ve gone over the controls a few times, it should be easy to remember what’s what, even out on a gig in a low-lighting scenario. The gain knobs turn fairly easily, but they do have a center detent, which is nice. This is even true for the mini shelving controls on the Deluxe! The frequency knobs have a bit more resistance, which I like, as it makes it easier to fine-tune. Both footswitches operate smoothly and confidently. I am also impressed by the (removable) rubber feet on the bottom. So many pedals come with glue-on “feet,” which either come off when you don’t want them to, or which can’t be put back on (if you remove them to put on a pedal board, and then later want to use the pedal on its own). These do a great job of holding the pedal steady when set straight on the floor, but can be easily removed when you want to do so.
Why Parametric?
My suspicion is that most people reading this review will already be somewhat familiar with the features of a parametric EQ and what they bring to the table, but if you are not familiar with how a parametric (or semi-parametric) EQ differs from a “regular” EQ, I will try to lay it out for you a bit. First off, there are five primary types of EQ: shelving, high-pass and low-pass, bandpass, graphic, and parametric. The ParaEQ MKII Deluxe features three of these five types, by the way.
Shelving EQ affects all frequencies above or below the predetermined frequency. Most “bass” or “treble” knobs on your average bass amp (or home audio system) are this type. High-pass and low-pass filters are designed to only allow frequencies higher or lower than a set frequency to pass through. These filters employ a roll-off (of a given slope) and the further from the roll-off frequency, the greater the reduction. High-pass filters are very effective tools for bass players, but we can spend all day talking about them… A bandpass filter “passes” a band of frequencies both above and below a given frequency, again with progressive attenuation. Graphic EQs are also targeted at a given frequency, and either boost or cut said frequency (and frequencies both lower and higher than the target, based upon the Q of the filter). A parametric EQ allows the user to control the center frequency, the gain (cut or boost), and the width, or Q, of the cut/boost. A “semi-parametric” EQ has one of these three controls missing – most typically the Q.
Parametric EQs can be uniquely helpful in several regards. One function is to help address certain frequencies which may be causing you feedback issues. If I experience certain rooms or instruments which are giving me feedback, I like to set my parametric EQ to a narrow Q, give it some boost, then sweep the frequency until the feedback gets worse, and then turn that boost into a cut. It can be very helpful to have multiple bands of parametric EQ on hand to address feedback issues, especially if it’s a bad room and you are switching acoustic instruments (which may feedback at slightly different frequencies). Another great use of parametric EQ is to help dial in the character/tone of your overdrive/distortion. On many occasions, I have spent a lot of time trying to dial in just the right overdrive, with less than stellar results, until I started adjusting the mids (with a parametric) and then, voilà! Just what I was after! Sometimes, a given instrument or rig will have a particular peak or valley in its frequency response that just keeps it from doing what you want. A parametric EQ can help you find, and then hopefully address, such shortcomings.
A decent number of bass preamps/heads incorporate shelving bass/treble, along with one or more bands of parametric (or semi-parametric) midrange EQ. Adding a pedal like the ParaEQ MKII or ParaEQ MKII Deluxe can not only bring additional tone control options to the table, it can also help shape your tone for a specific instrument which you don’t use on every song, or allow for a quick transition to a different EQ treatment for a particular song.
How Does This Tone Stack Stack Up?
My first opportunity to use the ParaEQ MKII and ParaEQ MKII Deluxe came on the day they arrived for review. A relatively new band of mine was playing a gig at a brand-new venue, and in this band, I play both upright bass and acoustic bass guitar. I knew that feedback was going to be a concern, in general, but I also did not know what to expect from the venue. As it turns out, it was a horrible room (in terms of feedback, boominess, etc. – the crowd, as it turned out, was phenomenal!), and I was very glad that I brought these two pretty, blue pedals with me.
My bass head for the gig was an Acoustic Image Focus 2R Series III, which fortunately has a notch filter (which can, alternately, serve as a high-pass filter, but not both at the same time), and this allowed me to tame a good bit of the room’s inherent boominess. However, although the Focus 2R has two channels (each with their own notch/cut filter), I was using one of those channels for my “porch board” (we didn’t have a percussionist at this point in time). With the two Empress pedals, I was able to dial in the ParaEQ MKII for an ideal tone and further reduced feedback from my acoustic bass guitar, while using the Deluxe to do the same for my Kay upright, but with the addition of the high-pass filter control. I still had to keep my volume down lower than I would have liked, but as I could tell when I tried bypassing their tone stacks, the two Empress pedals really saved the day (well, night, actually).
In addition to the feedback control and room correction, I also dialed in a little more air up top, and further tweaked the tone of each of my instruments a bit. I was definitely struck by the fact the ParaEQ MKII pedals were very musical, and very much the opposite of “heavy handed.” My experience has been that it’s easier to screw things up with EQ than it is to fix or improve anything, and many adjustments to correct one issue end up causing multiple other issues. I did not experience any of these issues with the Empress pedals, which really have the feel and functionality of a quality studio EQ.
I later spent some time comparing the two Empress pedals first off to each other, and secondly to several other EQ pedals and on-board tone stacks. Compared to other brands, both ParaEQ pedals were amazingly quiet (lack of hiss/noise), and they seemed very transparent – in the sense that other than what you are trying to do, they don’t seem do anything else to your tone. Even with some gain added, I generally don’t hear any hiss or noise. The only exception to this is that I do hear a small amount of hiss when I crank up the high shelving filter on the ParaEQ Deluxe, though even this is notably less than the amount of hiss generated by the other shelving EQ’s I compared it to.
When I compared the two units to each other, I had presumed that it would be fairly easy to dial in similar results on the ParaEQ MKII Deluxe to mimic anything I was doing with the ParaEQ MKII. While this is mostly true, I did find that for some reason, I could not quite match the exact effect I was getting on the ParaEQ MKII with the high frequency set all the way up (20kHz), the high gain all the way up, and the Q set to narrow. I tried the variable Q on the ParaEQ MKII Deluxe turned all the way to the right (the most narrow setting), and then I tried rolling it back just a bit, but it never sounded exactly the same (with the non-Deluxe having a more obvious treble boost at these settings). I could remedy this by dialing in just a touch of the high shelving boost, though.
Lasting Impressions
I have been a believer in parametric EQs for a long time, and they are a big part of how I shape my tone and also how I troubleshoot a room. With the ParaEQ MKII and ParaEQ MKII Deluxe in my arsenal, I feel confident that I can take on any room, with any instrument. These are some high-quality pedals that absolutely deliver on every promise they make. Their prices are extremely reasonable, especially when you realize the quality and functionality they offer. If you have never played around much with bass pedals, this would be a great way to dip your toe into uncharted waters. Conversely, if you already have an extensive pedal board, you are going to want to make just a tad bit more room and add one of these fine EQs to your board. You may even find that they replace multiple pedals taking up more space than they occupy!
Specifications – ParaEQ MKII
| Manufacturer: | Empress Effects Inc |
| Website: | https://empresseffects.com/ |
| Model: | ParaEQ MKII |
| Made In: | Canada |
| Enclosure: | Metal |
| Inputs: | ¼” input (1 MΩ), 9V adapter input (2.1mm, min. 300 mA) |
| Outputs: | ¼” output (100 Ω) |
| Controls: | Wide, medium, or narrow Q switch for low, mid, and high bands; frequency control for low, mid, and high bands; gain control for low, mid, and high bands; boost level; EQ bypass foot switch; boot engage foot switch |
| Other Features: | LEDs for EQ/boost functions; “enhanced configuration” options for bypass (true/buffered) and boost (independent or tied to EQ) |
| Dimensions: | 2.6" w x 4.8" l x 2.5" h |
| Weight: | 1 lb. |
| Warranty: | 2-year warranty (extended to 4-year by filling out online registration) |
| Price: | $274.00 (USD) |
Specifications – ParaEQ MKII Deluxe
| Manufacturer: | Empress Effects Inc |
| Website: | https://empresseffects.com/ |
| Model: | ParaEQ MKII Deluxe |
| Made In: | Canada |
| Enclosure: | Metal |
| Inputs: | ¼” input (1 MΩ), 9V adapter input (2.1mm, min. 300 mA) |
| Outputs: | ¼” output (100 Ω) |
| Controls: | Variable Q control for low, mid, and high bands; frequency control for low, mid, and high bands; gain control for low, mid, and high bands; high-pass filter control; low-shelf filter control; high-shelf filter control; low-pass filter control; boost level; EQ bypass foot switch; boot engage foot switch |
| Other Features: | LEDs for EQ/boost functions; “enhanced configuration” options for bypass (true/buffered) and boost (independent or tied to EQ) |
| Dimensions: | 2.6" w x 4.8" l x 2.5" h |
| Weight: | 1 lb. |
| Warranty: | 2-year warranty (extended to 4-year by filling out online registration) |
| Price: | $349.00 (USD) |

